Dakota UX2 Underwater Corrosion Thickness Gauge
Waterproof to a depth of 300 metres (1,000 feet), the Dakota UX2 Underwater Thickness Gauge is an underwater material and coating thickness gauge ideal for offshore inspections.
- Summary
-
Summary
-
The Dakota UX2 Underwater Corrosion Thickness Gauge offers many features and benefits of the CMX series in an easy to use brightly lit gauge.
Offering both dual & single element transducers the Dakota UX2 underwater thickness gauge memory allows users to store up to 5,000 individual readings, together with the A-Scan waveform which can be downloaded to the data management software for further analysis on dry land.
Transducer Options
A wide range of Underwater Thickness Transducers available
-
- Product Features
-
Product FeaturesDakota UX2 Underwater Corrosion Thickness Gauge
Model UX-2 Display Mode Material thickness digits display Measurement Range PE: 0.63 - 500mm (0.025 - 19.999”)
EE (ThruPaint™): 2.54 - 102mm (0.100 - 4.000”)
PECT: 0.63 - 500mm (0.025 - 19.999”)
PECT: 0.01 - 2.54mm (0.001 - 0.100”)
EEV (ThruPaint™): 1.00 - 152mm (0.040 - 6.000”)Measurement Resolution 0.01mm (0.001”)Velocity Calibration Range 1250 to 13995m/s (0.0492 to 0.5510in/µs)Manual 4 readings per secondMeasurement Rate Additional Features A-Scan Stored in memory with each reading for review on PCCalibration Setups 1 user programmable & 8 pre-calibrated velocities for: aluminium, cast iron, iron, PVC, polyurethane, polystyrene, stainless steel & steelWaterproof - depth rating Maximum depth 300 metres (1,000 feet) - equivalent to IP68Pulser Type Dual square wave pulsersGain Manual or automatic gain control (AGC) with 100dB range, or selectable gain: very low (vlow), low, medium, hi (high) or vhi (very high)Timing Precision temperature controlled crystal oscillator (TCXO) timing with single shot 100MHz 8bit ultra-low power digitizerData Logging Logging 5,000 with A-scan image & gauge settings in one batch sequential and grid logging alpha numeric batch identificationData Output RS232Calibration Options Velocity & material typeTransducer Probe Type Dual and Single ElementTransducer Frequency Range 1 - 10MHzTransducer Recognition Custom automatic (dual transducers) & manual - selectable from a listV-path / dual path error correction AutomaticProbe Zero Automatic (dual transducers) & manual (via integrated probe disk)Display 12.7mm (1/2") 4.5 digit LCDDisplay Refresh Rate 25HzUnits (selectable) mm or inchesBacklight on / off / autoRepeatability / Stability Indicator Low Battery Indicator
-
- Technical Information
-
Technical SpecificationDakota UX2 Underwater Corrosion Thickness Gauge
Part Number Description Certificate Z-185-0001 Dakota UX2 Underwater Corrosion Thickness Gauge (UMX-2) 
Operating Temperature -29 to 60ºC (-20 to 140ºF) Power Supply 3 x AA batteries Battery Life 50 hours on alkaline and 20 hours on NiCad (backlight off), 15 hours on alkaline and 8 hours on NiCad (backlight on) Gauge Weight 680g (24.0oz) - including batteries Gauge Dimensions 229.0 x 60.33mm (9.0 x 2.4”) Packing List Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. PC Software and Data Transfer Cable included with data logging gauges. ● Certificate of Calibration supplied as standard
-
- Standards
-
StandardsDakota UX2 Underwater Corrosion Thickness Gauge
Factory calibration: traceable to national standards.
-
- Downloads
-
Downloads
-
Dakota UX2 Underwater Corrosion Thickness Gauge (UMX-2) Instruction Manual
-
Dakota UX2 Underwater Corrosion Thickness Gauge (UMX-2) Datasheet
- Part Numbers
-
Part NumbersDakota UX2 Underwater Corrosion Thickness Gauge
-
Dakota UX2 Underwater Corrosion Thickness Gauge (UMX-2)- Part Number : Z-185-0001
-
Dakota UX2 Underwater Corrosion Thickness Gauge
Waterproof to a depth of 300 metres (1,000 feet), the Dakota UX2 Underwater Thickness Gauge is an underwater material and coating thickness gauge ideal for offshore inspections.
Summary
Dakota UX2 Underwater Corrosion Thickness Gauge
The Dakota UX2 Underwater Corrosion Thickness Gauge offers many features and benefits of the CMX series in an easy to use brightly lit gauge.
Offering both dual & single element transducers the Dakota UX2 underwater thickness gauge memory allows users to store up to 5,000 individual readings, together with the A-Scan waveform which can be downloaded to the data management software for further analysis on dry land.
Transducer Options
A wide range of Underwater Thickness Transducers available
Downloads-
Dakota UX2 Underwater Corrosion Thickness Gauge (UMX-2) Instruction Manual
-
Dakota UX2 Underwater Corrosion Thickness Gauge (UMX-2) Datasheet
Product FeaturesDakota UX2 Underwater Corrosion Thickness GaugeModel UX-2 Display Mode Material thickness digits display Measurement Range PE: 0.63 - 500mm (0.025 - 19.999”)
EE (ThruPaint™): 2.54 - 102mm (0.100 - 4.000”)
PECT: 0.63 - 500mm (0.025 - 19.999”)
PECT: 0.01 - 2.54mm (0.001 - 0.100”)
EEV (ThruPaint™): 1.00 - 152mm (0.040 - 6.000”)Measurement Resolution 0.01mm (0.001”)Velocity Calibration Range 1250 to 13995m/s (0.0492 to 0.5510in/µs)Manual 4 readings per secondMeasurement Rate Additional Features A-Scan Stored in memory with each reading for review on PCCalibration Setups 1 user programmable & 8 pre-calibrated velocities for: aluminium, cast iron, iron, PVC, polyurethane, polystyrene, stainless steel & steelWaterproof - depth rating Maximum depth 300 metres (1,000 feet) - equivalent to IP68Pulser Type Dual square wave pulsersGain Manual or automatic gain control (AGC) with 100dB range, or selectable gain: very low (vlow), low, medium, hi (high) or vhi (very high)Timing Precision temperature controlled crystal oscillator (TCXO) timing with single shot 100MHz 8bit ultra-low power digitizerData Logging Logging 5,000 with A-scan image & gauge settings in one batch sequential and grid logging alpha numeric batch identificationData Output RS232Calibration Options Velocity & material typeTransducer Probe Type Dual and Single ElementTransducer Frequency Range 1 - 10MHzTransducer Recognition Custom automatic (dual transducers) & manual - selectable from a listV-path / dual path error correction AutomaticProbe Zero Automatic (dual transducers) & manual (via integrated probe disk)Display 12.7mm (1/2") 4.5 digit LCDDisplay Refresh Rate 25HzUnits (selectable) mm or inchesBacklight on / off / autoRepeatability / Stability Indicator Low Battery Indicator Technical SpecificationDakota UX2 Underwater Corrosion Thickness GaugePart Number Description Certificate Z-185-0001 Dakota UX2 Underwater Corrosion Thickness Gauge (UMX-2) Operating Temperature -29 to 60ºC (-20 to 140ºF) Power Supply 3 x AA batteries Battery Life 50 hours on alkaline and 20 hours on NiCad (backlight off), 15 hours on alkaline and 8 hours on NiCad (backlight on) Gauge Weight 680g (24.0oz) - including batteries Gauge Dimensions 229.0 x 60.33mm (9.0 x 2.4”) Packing List Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. PC Software and Data Transfer Cable included with data logging gauges. ● Certificate of Calibration supplied as standardStandardsDakota UX2 Underwater Corrosion Thickness GaugeFactory calibration: traceable to national standards.
-
-