Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Corrosion Thickness Gauge has large, easy to read displays and provides users with A and B-Scan options for accurate interpretation of measurements.
- 概要
-
概要
-
Versatile
Measures uncoated & coated surfaces
Flexible & easy to use, the Dakota MX2-DL Corrosion Thickness gauge doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ Mode (EE), coatings up to 2mm (80mils) are ignored.
Powerful
Store up to 4GB of readings and waveforms or B-Scans
Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB of readings together with their waveforms.
Customisable
Choose & customise the reading display
The Dakota MX2-DL ultrasonic thickness gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, B-Scan, B-Scan combined with readings, Scan bar & the A-Scan.
The Dakota MX2-DL Thickness Gauge offers 2D cross sectional block view, providing a graphical representation of a material's thickness, ideal for accurate analysis and identification of pits and corroded areas.
MX2-DL Ultrasonic Thickness Gauge: Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB worth of data together with their waveforms. The MX2-DL Thickness Gauge also features an A-Scan display, allowing users to fully interpret and control measurement readings. The user can select to view either the full waveform (RF) or the rectified waveform (RECT) showing either the positive or the negative cycle of the full waveform.
-
- 主要特点
-
主要特点
Dakota MX2-DL Corrosion Thickness Gauge
Support & Resources
Transducer Options
A wide range of Corrosion Thickness Transducers available.
DakMaster™
From inspection to professional reports at the click of a button.
Features Explained
Repeatability / Stability Indicator
Consisting of 6 vertical bars, when all the bars are fully illuminated and the last digit on the digital thickness value is stable, the gauge is reliably measuring the material thickness.
High Speed Scan with Minimum Thickness Display
By significantly increasing the measurement refresh rate this mode allows the user to make scanned passes over the test material. The smallest thickness value is held in memory and displayed when scanning is complete. This feature can also be used in conjunction with the minimum & maximum limit alarm feature (model dependant).
Differential Mode
Once a user defined nominal thickness value has been set, the gauge will display the +/- thickness difference from the nominal value entered.
Limit Alarm Mode
The user can define minimum and maximum thickness limits. If the measurement falls outside the upper or lower limit a red LED will light and the beeper sounds. A green LED will light to indicate an acceptable thickness.
V-Path Correction
Dual element transducers consist of a probe with two crystals (one to transmit and one to receive the sound pulse). The crystals are separated by an acoustic barrier - generating a 'V-shaped' sound path as the sound travels from one element to the other. This path is slightly longer than the direct path therefore V-path correction is used to calculate the correct thickness.
Measurement Modes Explained
Pulse Echo (PE):
The normal display mode, measures the total thickness from the base of the transducer probe to the material density boundary (typically the back wall). Ideal for pit and flaw detection.
Echo - Echo Mode (EE):
Also known as the ThruPaint™ Mode, EE ignores the coating thickness, displaying the material thickness from the top surface of the material to the material density boundary.
Display Modes Explained
Material Thickness Digits Display:
The standard display on all models, this displays the numerical thickness value in either millimetres (MM) or inches (IN).
Scan Bar Display:
A linear graphic display which allows users to graphically monitor changes in thickness readings. As the scale range can be adjusted by the user, this display is ideal for observing tiny variations in material thicknesses.
B-Scan Display:
A time based cross sectional 2D block view of the thickness provides a graphical view of the material thickness - ideal for relative depth analysis.
A-Scan Display; Full Wave (RF):*
The A-Scan display shows the sine wave created by the reflected sound, or oscillation, from the material being measured. In RF mode the full wave form is displayed.
A-Scan Display; Rectified (+ or -):*
Users can select to view either the positive or the negative cycle of the full waveform (RF). This rectified (RECT) display shows the amplitude of the echo versus the transit time.
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Corrosion Thickness Gauge is running the latest firmware, select your gauge below.
Dakota Ultrasonic MMX-7
Dakota Ultrasonic MVX
DakotaNDT MX
-
- 产品特点
-
产品特点Dakota MX2-DL Corrosion Thickness Gauge
Model MX2-DL 显示屏模式 材料厚度数字显示 B型扫描横截面显示屏 B型扫描与数字显示相结合 扫描栏显示 A型扫描显示 正波，负波，全波形（RF）Measurement Rate 手动 每秒8个读数扫描模式 每秒250个读数扫描栏显示屏 每秒10读数测量分辨率 0.01mm (0.001”)速度校准范围 309.88 - 18,542m/s (0.0122 - 0.7300in/μs)其他特征 高速扫描模式 差值模式 极限报警模式 B型扫描显示速度 每屏10-200秒探伤模式 64个用户可定义的设置，可传输给PC机进行 存档校准设置 • PE: 1 闸门; EE: 2 闸门, 1闸门带延迟可调节阀
• 可调节的阀闸门 Square wave pulser with adjustable pulse width (spike, thin, wide)脉冲模式 Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)增益 100MHz 8 bit ultra low power digitizer内存和数据记录 • 4GB内存
• 序列和网格录入
• 字母数字标识
• OBSTRUCT显示达不到的区域
• 位图图形抓取和抓取查看器传感器探头类型 双晶传感器频率范围 1 - 10MHz传感器识别 手动-从列表中选择V型路径/双路径校正 自动探头归零 手动（通过一体式探头磁盘）显示 ⅛ VGA （灰度）
62 x 45.7毫米 (2.4 x 1.8 英寸) 可视区域显示刷新率 25Hz单位（可选择） 毫米或英寸LED背光 开/关/自动重复性/稳定性指示器
-
- 技术信息
-
Technical SpecificationDakota MX2-DL Corrosion Thickness Gauge
Part Number Description Certificate Z-149-0006 Dakota MX2-DL Thickness Gauge (MVX) 
传感器探头类型 双晶 测量精确度 0.01mm (0.001”) 记忆 4GB内存 操作温度 -10至60ºC (14至140ºF) 数据输出 USB 电源 3节AA电池，以及通过USB供电 电池寿命 碱性—35小时，镍镉–10小时，镍氢–35小时 仪器重量 383g (13.5oz) - 包括电池 仪器尺寸 63.5 x 165 x 31.5mm (2.5 x 6.5 x 1.24”) 包装清单 Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. PC Software and Data Transfer Cable included with data logging gauges. 1Measuring range & accuracy depends on material, surface conditions and the transducer selected
2Approximate battery life, when in continuous measurement mode.
● Certificate of Calibration supplied as standard
-
- 标准
-
标准Dakota MX2-DL Corrosion Thickness Gauge
Factory calibration traceable to NIST & MIL-STD-45662
-
- 下载
-
下载
-
Elcometer CG70 腐蚀度检测仪 操作手册
-
Elcometer CG70 腐蚀度检测仪 - 产品简介
-
Elcometer CG70 腐蚀度检测仪 - 符合性声明
- 部件编号
-
部件编号Dakota MX2-DL Corrosion Thickness Gauge
-
Dakota MX2-DL Corrosion Thickness Gauge- 部件编号 : Z-149-0006
Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Corrosion Thickness Gauge has large, easy to read displays and provides users with A and B-Scan options for accurate interpretation of measurements.
Versatile
Measures uncoated & coated surfaces
Flexible & easy to use, the Dakota MX2-DL Corrosion Thickness gauge doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ Mode (EE), coatings up to 2mm (80mils) are ignored.
Powerful
Store up to 4GB of readings and waveforms or B-Scans
Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB of readings together with their waveforms.
Customisable
Choose & customise the reading display
The Dakota MX2-DL ultrasonic thickness gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, B-Scan, B-Scan combined with readings, Scan bar & the A-Scan.
概要
Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Thickness Gauge offers 2D cross sectional block view, providing a graphical representation of a material's thickness, ideal for accurate analysis and identification of pits and corroded areas.
MX2-DL Ultrasonic Thickness Gauge: Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB worth of data together with their waveforms. The MX2-DL Thickness Gauge also features an A-Scan display, allowing users to fully interpret and control measurement readings. The user can select to view either the full waveform (RF) or the rectified waveform (RECT) showing either the positive or the negative cycle of the full waveform.
主要特点
Dakota MX2-DL Corrosion Thickness Gauge
Support & Resources
Transducer Options
A wide range of Corrosion Thickness Transducers available.
DakMaster™
From inspection to professional reports at the click of a button.
Features Explained
Repeatability / Stability Indicator
Consisting of 6 vertical bars, when all the bars are fully illuminated and the last digit on the digital thickness value is stable, the gauge is reliably measuring the material thickness.
High Speed Scan with Minimum Thickness Display
By significantly increasing the measurement refresh rate this mode allows the user to make scanned passes over the test material. The smallest thickness value is held in memory and displayed when scanning is complete. This feature can also be used in conjunction with the minimum & maximum limit alarm feature (model dependant).
Differential Mode
Once a user defined nominal thickness value has been set, the gauge will display the +/- thickness difference from the nominal value entered.
Limit Alarm Mode
The user can define minimum and maximum thickness limits. If the measurement falls outside the upper or lower limit a red LED will light and the beeper sounds. A green LED will light to indicate an acceptable thickness.
V-Path Correction
Dual element transducers consist of a probe with two crystals (one to transmit and one to receive the sound pulse). The crystals are separated by an acoustic barrier - generating a 'V-shaped' sound path as the sound travels from one element to the other. This path is slightly longer than the direct path therefore V-path correction is used to calculate the correct thickness.
Measurement Modes Explained
Pulse Echo (PE):
The normal display mode, measures the total thickness from the base of the transducer probe to the material density boundary (typically the back wall). Ideal for pit and flaw detection.
Echo - Echo Mode (EE):
Also known as the ThruPaint™ Mode, EE ignores the coating thickness, displaying the material thickness from the top surface of the material to the material density boundary.
Display Modes Explained
Material Thickness Digits Display:
The standard display on all models, this displays the numerical thickness value in either millimetres (MM) or inches (IN).
Scan Bar Display:
A linear graphic display which allows users to graphically monitor changes in thickness readings. As the scale range can be adjusted by the user, this display is ideal for observing tiny variations in material thicknesses.
B-Scan Display:
A time based cross sectional 2D block view of the thickness provides a graphical view of the material thickness - ideal for relative depth analysis.
A-Scan Display; Full Wave (RF):*
The A-Scan display shows the sine wave created by the reflected sound, or oscillation, from the material being measured. In RF mode the full wave form is displayed.
A-Scan Display; Rectified (+ or -):*
Users can select to view either the positive or the negative cycle of the full waveform (RF). This rectified (RECT) display shows the amplitude of the echo versus the transit time.
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Corrosion Thickness Gauge is running the latest firmware, select your gauge below.
Dakota Ultrasonic MMX-7
Dakota Ultrasonic MVX
DakotaNDT MX
产品特点Dakota MX2-DL Corrosion Thickness GaugeModel MX2-DL 显示屏模式 材料厚度数字显示 B型扫描横截面显示屏 B型扫描与数字显示相结合 扫描栏显示 A型扫描显示 正波，负波，全波形（RF）Measurement Rate 手动 每秒8个读数扫描模式 每秒250个读数扫描栏显示屏 每秒10读数测量分辨率 0.01mm (0.001”)速度校准范围 309.88 - 18,542m/s (0.0122 - 0.7300in/μs)其他特征 高速扫描模式 差值模式 极限报警模式 B型扫描显示速度 每屏10-200秒探伤模式 64个用户可定义的设置，可传输给PC机进行 存档校准设置 • PE: 1 闸门; EE: 2 闸门, 1闸门带延迟可调节阀
• 可调节的阀闸门 Square wave pulser with adjustable pulse width (spike, thin, wide)脉冲模式 Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)增益 100MHz 8 bit ultra low power digitizer内存和数据记录 • 4GB内存
• 序列和网格录入
• 字母数字标识
• OBSTRUCT显示达不到的区域
• 位图图形抓取和抓取查看器传感器探头类型 双晶传感器频率范围 1 - 10MHz传感器识别 手动-从列表中选择V型路径/双路径校正 自动探头归零 手动（通过一体式探头磁盘）显示 ⅛ VGA （灰度）
62 x 45.7毫米 (2.4 x 1.8 英寸) 可视区域显示刷新率 25Hz单位（可选择） 毫米或英寸LED背光 开/关/自动重复性/稳定性指示器 Technical SpecificationDakota MX2-DL Corrosion Thickness GaugePart Number Description Certificate Z-149-0006 Dakota MX2-DL Thickness Gauge (MVX) 传感器探头类型 双晶 测量精确度 0.01mm (0.001”) 记忆 4GB内存 操作温度 -10至60ºC (14至140ºF) 数据输出 USB 电源 3节AA电池，以及通过USB供电 电池寿命 碱性—35小时，镍镉–10小时，镍氢–35小时 仪器重量 383g (13.5oz) - 包括电池 仪器尺寸 63.5 x 165 x 31.5mm (2.5 x 6.5 x 1.24”) 包装清单 Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. PC Software and Data Transfer Cable included with data logging gauges. 1Measuring range & accuracy depends on material, surface conditions and the transducer selected
2Approximate battery life, when in continuous measurement mode.
● Certificate of Calibration supplied as standard -
-