Dakota BT2-DL Benchtop Bolt Tension Monitor
The Dakota BT2-DL is a high-precision benchtop Bolt Tension Monitor designed to measure bolt tension, elongation, load, and stress using advanced ultrasonic technology. Unlike standard torque methods, the BT2-DL provides accuracy within ±0.00001 inches (0.0001 mm) for fasteners up to 100 feet in length.
- 概要
-
概要
-
It incorporates all of the great features of the Dakota BT1-DL Bolt Tension Monitor, with some added benefits in terms of features, hardware, speed, and length. Dakota BT2-DL Ultrasonic Bolt Tension Monitor very accurately measures fasteners up to 100 feet in length, and sports our very best effort to date…in terms of overall performance/power!
Transducer Options
A wide range of Single Element Contact Transducers available
-
- 主要特点
-
主要特点
Dakota BT2-DL Benchtop Bolt Tension Monitor
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Bolt Tension Monitor is running the latest firmware, select your gauge below.
Dakota Ultrasonics Max II
Dakota NDT BT2-DL
-
- 产品特点
-
Dakota NDT BT Benchtop Bolt Tension Monitor
产品特点Dakota BT2-DL Benchtop Bolt Tension Monitor
Model BT2-DL Display Mode 材料厚度数字显示 A-Scan 整流+/-（半波视图），或RF（全波形视图）BTM Measurement Range PE - 25.4 - 25,400mm (1 - 999”), EE, EEV测量精确度1 +/- 0.0001mm (+/- 0.00001")Measurement Rate 手动 每秒8个读数速度较准范围 1250 - 13,995m/s (0.0492 - 0.5510 in/μs)温度补偿 极限报警模式 内存和数据记录 4GB内存
顺序和网格日志
位图图形抓取和抓取查看器校准选项 自动，固定，单点和两点校准传感器探头类型 单晶传感器频率范围 1 - 10MHz显示 Blanview sunlight readable QVGA TFT color display (320 x 240 pixels)
Viewable area 4.54 x 3.40 in (115.2 x 86.4 mm), or 5.7 in (144.78 mm) diagonal单位（可选择） in/mm, μsLED背光 开/关/自动重复性/稳定性指示器 电量低指示器 省电模式 自动传感连接器类型 Microdot, Lemo and BNCUSB接口 温度传感器 显示刷新率 60Hz计时 采用精密温控晶体振荡器（TCXO），进行单次100MHz/8bit的超低功耗数字化定时脉冲模式 Spike, Square Wave & Tone Burst.Pulser Voltage: 100 – 400v
Selectable step options Spike, Thin, Wide, HV Spike, HV Thin, HV Wide, TB .5MHz, TB 1MHz, TB 2MHz, TB 5MHz, TB 10 MHz. Spike 40 ns, Square Wave 80 to 400 ns, Tone Burst 50 ns to 1 microsecond阻尼 50, 75, 100, 300, 600, & 1500ohms频段 滤波器带宽1.8-19 MHz（-3dB）水平线性 +/- 0.4% FSW垂直线性 +/- 1% FSH放大器线性 +/- 1 dB振幅测量 0 至 100% FSH, 1%的分辨率延迟 钢上的速度是0 - 999.9英寸 (25,400毫米)显示 Three independent gates depending on measurement mode selected, with audible and visual alarms. Amplitude 5-95%, 1% steps设置 64个用户自定义的设置；工厂设置也可编辑自动设置 可使每个螺栓的检测、范围和显示设置过程自动化报警限值 可调节高/低公差，带有可视LED以及蜂鸣器报警现场校准 向量和回归线校正曲线，提高负荷和应力检测的精度限制条报警 显示可接受公差范围的高低报警限值探测 零交叉点时间 纳秒伸长率 长度变化（英寸/毫米）负荷 施加的负荷力（磅KIP或兆帕MPa）应力 单位面积施加的力（英寸/英寸或毫米/毫米）应力百分比 有效长度的延伸率螺栓材料 从预设或自定义列表中选择类型粘接 用于延长率小的短螺栓，以避免传感器放置错误
-
Dakota NDT BT Benchtop Bolt Tension Monitor
- 技术信息
-
附件Dakota BT2-DL Benchtop Bolt Tension Monitor
部件编号 产品描述 证书 Z-197-0001 Dakota BT2-DL Benchtop Bolt Tension Monitor (Max II) 
操作温度 -10至60ºC (14至140ºF) 电源 Lithium Ion Pack (supplied) or 6 x AA batteries 电池寿命 Lithium Pack: 18hrs, Alkaline: 12 hrs, Nicad: 5 hrs, NI-MH: 12 hrs 仪器重量 2.04kg (4.5lbs) - including batteries 仪器尺寸 216 x 165 x 70mm (8.5 x 6.5 x 2.5”) 包装清单 Unit, Lithium Pack, 4 oz. Bottle of Couplant, USB Type A to Type B Transfer Cable, Carrying Case, 10’ Lemo 00 to Microdot Transducer Cable, PC Utility Software (download from website), Operation Manual and Certification. ● Certificate supplied as standard
-
- 标准
-
标准Dakota BT2-DL Benchtop Bolt Tension Monitor
Factory calibration traceable to NIST & MIL-STD-45662A
-
- 下载
-
下载
-
Elcometer BG80 螺栓张力检测仪 - 操作手册
-
Elcometer BG80 螺栓张力检测仪 - 产品简介
-
Elcometer BG80 螺栓张力检测仪 符合性声明
- 部件编号
-
部件编号Dakota BT2-DL Benchtop Bolt Tension Monitor
-
Dakota BT2-DL Benchtop Bolt Tension Monitor (Max II)- 部件编号 : Z-197-0001
-
Dakota BT2-DL Benchtop Bolt Tension Monitor
The Dakota BT2-DL is a high-precision benchtop Bolt Tension Monitor designed to measure bolt tension, elongation, load, and stress using advanced ultrasonic technology. Unlike standard torque methods, the BT2-DL provides accuracy within ±0.00001 inches (0.0001 mm) for fasteners up to 100 feet in length.
概要
Dakota BT2-DL Benchtop Bolt Tension Monitor
It incorporates all of the great features of the Dakota BT1-DL Bolt Tension Monitor, with some added benefits in terms of features, hardware, speed, and length. Dakota BT2-DL Ultrasonic Bolt Tension Monitor very accurately measures fasteners up to 100 feet in length, and sports our very best effort to date…in terms of overall performance/power!
Transducer Options
A wide range of Single Element Contact Transducers available
主要特点
Dakota BT2-DL Benchtop Bolt Tension Monitor
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Bolt Tension Monitor is running the latest firmware, select your gauge below.
Dakota Ultrasonics Max II
Dakota NDT BT2-DL
Dakota NDT BT Benchtop Bolt Tension Monitor产品特点Dakota BT2-DL Benchtop Bolt Tension MonitorModel BT2-DL Display Mode 材料厚度数字显示 A-Scan 整流+/-（半波视图），或RF（全波形视图）BTM Measurement Range PE - 25.4 - 25,400mm (1 - 999”), EE, EEV测量精确度1 +/- 0.0001mm (+/- 0.00001")Measurement Rate 手动 每秒8个读数速度较准范围 1250 - 13,995m/s (0.0492 - 0.5510 in/μs)温度补偿 极限报警模式 内存和数据记录 4GB内存
顺序和网格日志
位图图形抓取和抓取查看器校准选项 自动，固定，单点和两点校准传感器探头类型 单晶传感器频率范围 1 - 10MHz显示 Blanview sunlight readable QVGA TFT color display (320 x 240 pixels)
Viewable area 4.54 x 3.40 in (115.2 x 86.4 mm), or 5.7 in (144.78 mm) diagonal单位（可选择） in/mm, μsLED背光 开/关/自动重复性/稳定性指示器 电量低指示器 省电模式 自动传感连接器类型 Microdot, Lemo and BNCUSB接口 温度传感器 显示刷新率 60Hz计时 采用精密温控晶体振荡器（TCXO），进行单次100MHz/8bit的超低功耗数字化定时脉冲模式 Spike, Square Wave & Tone Burst.Pulser Voltage: 100 – 400v
Selectable step options Spike, Thin, Wide, HV Spike, HV Thin, HV Wide, TB .5MHz, TB 1MHz, TB 2MHz, TB 5MHz, TB 10 MHz. Spike 40 ns, Square Wave 80 to 400 ns, Tone Burst 50 ns to 1 microsecond阻尼 50, 75, 100, 300, 600, & 1500ohms频段 滤波器带宽1.8-19 MHz（-3dB）水平线性 +/- 0.4% FSW垂直线性 +/- 1% FSH放大器线性 +/- 1 dB振幅测量 0 至 100% FSH, 1%的分辨率延迟 钢上的速度是0 - 999.9英寸 (25,400毫米)显示 Three independent gates depending on measurement mode selected, with audible and visual alarms. Amplitude 5-95%, 1% steps设置 64个用户自定义的设置；工厂设置也可编辑自动设置 可使每个螺栓的检测、范围和显示设置过程自动化报警限值 可调节高/低公差，带有可视LED以及蜂鸣器报警现场校准 向量和回归线校正曲线，提高负荷和应力检测的精度限制条报警 显示可接受公差范围的高低报警限值探测 零交叉点时间 纳秒伸长率 长度变化（英寸/毫米）负荷 施加的负荷力（磅KIP或兆帕MPa）应力 单位面积施加的力（英寸/英寸或毫米/毫米）应力百分比 有效长度的延伸率螺栓材料 从预设或自定义列表中选择类型粘接 用于延长率小的短螺栓，以避免传感器放置错误附件Dakota BT2-DL Benchtop Bolt Tension Monitor部件编号 产品描述 证书 Z-197-0001 Dakota BT2-DL Benchtop Bolt Tension Monitor (Max II) 操作温度 -10至60ºC (14至140ºF) 电源 Lithium Ion Pack (supplied) or 6 x AA batteries 电池寿命 Lithium Pack: 18hrs, Alkaline: 12 hrs, Nicad: 5 hrs, NI-MH: 12 hrs 仪器重量 2.04kg (4.5lbs) - including batteries 仪器尺寸 216 x 165 x 70mm (8.5 x 6.5 x 2.5”) 包装清单 Unit, Lithium Pack, 4 oz. Bottle of Couplant, USB Type A to Type B Transfer Cable, Carrying Case, 10’ Lemo 00 to Microdot Transducer Cable, PC Utility Software (download from website), Operation Manual and Certification. ● Certificate supplied as standard标准Dakota BT2-DL Benchtop Bolt Tension MonitorFactory calibration traceable to NIST & MIL-STD-45662A
-
-