Dakota BT1-DL Bolt Tension Monitor
The Dakota BT1-DL Bolt Tension Monitor uses ultrasound to precisely measure fastener elongation, time (nanoseconds), load, stress & %strain.
- 概要
-
概要
-
When nuts and bolts are fastened together under load the action of tightening the nut increases the force applied to the bolt causing elongation.
By using ultrasonics, bolt tension monitors are not affected by temperature, friction or resistance factors affecting the accuracy of standard torque measurement techniques - giving the Dakota BT1-DL Bolt Tension Monitor accuracy within 0.0001mm (0.00001 inch).
Using the gauge's USB interface together with the optional shut off accessory the gauge can be programmed to automatically stop the tightening process when the appropriate load has been applied.
Features:
- Range of display & measurement options including: Elongation, Load, Stress, and %Strain, RF, Rectified, Large Digits with Limits Bar
- Temperature compensation to counteract measurement irregularity caused by temperature change
- Data storage capability: 4GB internal memory
- Auto Set feature automatically optimizes detection and adjusts display
- Hi/Lo Alarm tolerance limits work in conjunction with the data port
Transducers Options
A wide range of Single Element Contact Transducers available
-
- 主要特点
-
主要特点
Dakota BT1-DL Bolt Tension Monitor
Applications
Wind Turbines
Automotive Frames
Bridge Structures
Theme Parks
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Bolt Tension Monitor is running the latest firmware, select your gauge below.
Dakota Ultrasonics MiniMax
Dakota NDT BT1-DL
-
- 产品特点
-
Dakota NDT BT Bolt Tension Monitors
产品特点Dakota BT1-DL Bolt Tension Monitor
Model BT1-DL Display Mode 材料厚度数字显示 A-Scan 整流+/-（半波视图），或RF（全波形视图）BTM Measurement Range PE - 25.4 - 25,400mm (1 - 999”)测量精确度1 0.001mm (0.0001”) 或 0.0001mm (0.00001”)可切换Measurement Rate 手动 每秒8个读数速度较准范围 1250 - 13,995m/s (0.0492 - 0.5510 in/μs)温度补偿 极限报警模式 内存和数据记录 4GB内存
顺序和网格日志
位图图形抓取和抓取查看器校准选项 自动，固定，单点和两点校准传感器探头类型 单晶传感器频率范围 1 - 10MHz显示 1/8英寸VGA灰度显示器（240 x 160像素）
可视区域62 x 45.7mm（2.4 x 1.8“）单位（可选择） in/mm, μs, °F/°CLED背光 开/关/自动重复性/稳定性指示器 电量低指示器 省电模式 自动传感连接器类型 Microdot, Lemo and BNCUSB接口 温度传感器 5针LEMO1接头显示刷新率 30 Hz计时 采用精密温控晶体振荡器（TCXO），进行单次100MHz/8bit的超低功耗数字化定时脉冲模式 方波。可选择100、150和200伏。可选选项峰尖、细和宽。80至400纳秒阻尼 50, 75, 100, 300, 600, & 1500ohms频段 滤波器带宽1.8-19 MHz（-3dB）水平线性 +/- 0.4% FSW垂直线性 +/- 1% FSH放大器线性 +/- 1 dB振幅测量 0 至 100% FSH, 1%的分辨率延迟 钢上的速度是0 - 999.9英寸 (25,400毫米)显示 一个闸门带声光报警器，振幅5-95%，阶跃1%设置 64个用户自定义的设置；工厂设置也可编辑自动设置 可使每个螺栓的检测、范围和显示设置过程自动化报警限值 可调节高/低公差，带有可视LED以及蜂鸣器报警现场校准 向量和回归线校正曲线，提高负荷和应力检测的精度限制条报警 显示可接受公差范围的高低报警限值探测 零交叉点时间 纳秒伸长率 长度变化（英寸/毫米）负荷 施加的负荷力（磅KIP或兆帕MPa）应力 单位面积施加的力（英寸/英寸或毫米/毫米）应力百分比 有效长度的延伸率螺栓材料 从预设或自定义列表中选择类型粘接 用于延长率小的短螺栓，以避免传感器放置错误
-
Dakota NDT BT Bolt Tension Monitors
- 技术信息
-
附件Dakota BT1-DL Bolt Tension Monitor
部件编号 产品描述 证书 Z-156-0008 Dakota BT1-DL Bolt Tension Monitor (MiniMax) 
操作温度 -10至60ºC (14至140ºF) 电源 3节AA电池，以及通过USB供电 电池寿命 碱性—35小时，镍镉–10小时，镍氢–35小时 仪器重量 383g (13.5oz) - 包括电池 仪器尺寸 63.5 x 165 x 31.5mm 包装清单 Unit, 3 AA Batteries, 4 oz. Bottle of Couplant, USB Type A to Type C Transfer Cable, Carrying Case, 10’ Lemo to Microdot Transducer cable, PC Utility Software (download from website), Operation Manual and Certification. ● Certificate supplied as standard
-
- 标准
-
标准Dakota BT1-DL Bolt Tension Monitor
Factory calibration traceable to NIST & MIL-STD-45662A
-
- 下载
-
下载
-
Elcometer BG80 螺栓张力检测仪 - 操作手册
-
Elcometer BG80 螺栓张力检测仪 - 产品简介
-
Elcometer BG80 螺栓张力检测仪 符合性声明
- 部件编号
-
部件编号Dakota BT1-DL Bolt Tension Monitor
-
Dakota BT1-DL Bolt Tension Monitor (MiniMax)- 部件编号 : Z-156-0008
-
Dakota BT1-DL Bolt Tension Monitor
The Dakota BT1-DL Bolt Tension Monitor uses ultrasound to precisely measure fastener elongation, time (nanoseconds), load, stress & %strain.
概要
Dakota BT1-DL Bolt Tension Monitor
When nuts and bolts are fastened together under load the action of tightening the nut increases the force applied to the bolt causing elongation.
By using ultrasonics, bolt tension monitors are not affected by temperature, friction or resistance factors affecting the accuracy of standard torque measurement techniques - giving the Dakota BT1-DL Bolt Tension Monitor accuracy within 0.0001mm (0.00001 inch).
Using the gauge's USB interface together with the optional shut off accessory the gauge can be programmed to automatically stop the tightening process when the appropriate load has been applied.
Features:
- Range of display & measurement options including: Elongation, Load, Stress, and %Strain, RF, Rectified, Large Digits with Limits Bar
- Temperature compensation to counteract measurement irregularity caused by temperature change
- Data storage capability: 4GB internal memory
- Auto Set feature automatically optimizes detection and adjusts display
- Hi/Lo Alarm tolerance limits work in conjunction with the data port
Transducers Options
A wide range of Single Element Contact Transducers available
主要特点
Dakota BT1-DL Bolt Tension Monitor
Applications
Wind Turbines
Automotive Frames
Bridge Structures
Theme Parks
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Bolt Tension Monitor is running the latest firmware, select your gauge below.
Dakota Ultrasonics MiniMax
Dakota NDT BT1-DL
Dakota NDT BT Bolt Tension Monitors产品特点Dakota BT1-DL Bolt Tension MonitorModel BT1-DL Display Mode 材料厚度数字显示 A-Scan 整流+/-（半波视图），或RF（全波形视图）BTM Measurement Range PE - 25.4 - 25,400mm (1 - 999”)测量精确度1 0.001mm (0.0001”) 或 0.0001mm (0.00001”)可切换Measurement Rate 手动 每秒8个读数速度较准范围 1250 - 13,995m/s (0.0492 - 0.5510 in/μs)温度补偿 极限报警模式 内存和数据记录 4GB内存
顺序和网格日志
位图图形抓取和抓取查看器校准选项 自动，固定，单点和两点校准传感器探头类型 单晶传感器频率范围 1 - 10MHz显示 1/8英寸VGA灰度显示器（240 x 160像素）
可视区域62 x 45.7mm（2.4 x 1.8“）单位（可选择） in/mm, μs, °F/°CLED背光 开/关/自动重复性/稳定性指示器 电量低指示器 省电模式 自动传感连接器类型 Microdot, Lemo and BNCUSB接口 温度传感器 5针LEMO1接头显示刷新率 30 Hz计时 采用精密温控晶体振荡器（TCXO），进行单次100MHz/8bit的超低功耗数字化定时脉冲模式 方波。可选择100、150和200伏。可选选项峰尖、细和宽。80至400纳秒阻尼 50, 75, 100, 300, 600, & 1500ohms频段 滤波器带宽1.8-19 MHz（-3dB）水平线性 +/- 0.4% FSW垂直线性 +/- 1% FSH放大器线性 +/- 1 dB振幅测量 0 至 100% FSH, 1%的分辨率延迟 钢上的速度是0 - 999.9英寸 (25,400毫米)显示 一个闸门带声光报警器，振幅5-95%，阶跃1%设置 64个用户自定义的设置；工厂设置也可编辑自动设置 可使每个螺栓的检测、范围和显示设置过程自动化报警限值 可调节高/低公差，带有可视LED以及蜂鸣器报警现场校准 向量和回归线校正曲线，提高负荷和应力检测的精度限制条报警 显示可接受公差范围的高低报警限值探测 零交叉点时间 纳秒伸长率 长度变化（英寸/毫米）负荷 施加的负荷力（磅KIP或兆帕MPa）应力 单位面积施加的力（英寸/英寸或毫米/毫米）应力百分比 有效长度的延伸率螺栓材料 从预设或自定义列表中选择类型粘接 用于延长率小的短螺栓，以避免传感器放置错误附件Dakota BT1-DL Bolt Tension Monitor部件编号 产品描述 证书 Z-156-0008 Dakota BT1-DL Bolt Tension Monitor (MiniMax) 操作温度 -10至60ºC (14至140ºF) 电源 3节AA电池，以及通过USB供电 电池寿命 碱性—35小时，镍镉–10小时，镍氢–35小时 仪器重量 383g (13.5oz) - 包括电池 仪器尺寸 63.5 x 165 x 31.5mm 包装清单 Unit, 3 AA Batteries, 4 oz. Bottle of Couplant, USB Type A to Type C Transfer Cable, Carrying Case, 10’ Lemo to Microdot Transducer cable, PC Utility Software (download from website), Operation Manual and Certification. ● Certificate supplied as standard -
-