Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Corrosion Thickness Gauge has large, easy to read displays and provides users with A and B-Scan options for accurate interpretation of measurements.
- Sommaire
-
Sommaire
-
Versatile
Measures uncoated & coated surfaces
Flexible & easy to use, the Dakota MX2-DL Corrosion Thickness gauge doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ Mode (EE), coatings up to 2mm (80mils) are ignored.
Powerful
Store up to 4GB of readings and waveforms or B-Scans
Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB of readings together with their waveforms.
Customisable
Choose & customise the reading display
The Dakota MX2-DL ultrasonic thickness gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, B-Scan, B-Scan combined with readings, Scan bar & the A-Scan.
The Dakota MX2-DL Thickness Gauge offers 2D cross sectional block view, providing a graphical representation of a material's thickness, ideal for accurate analysis and identification of pits and corroded areas.
MX2-DL Ultrasonic Thickness Gauge: Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB worth of data together with their waveforms. The MX2-DL Thickness Gauge also features an A-Scan display, allowing users to fully interpret and control measurement readings. The user can select to view either the full waveform (RF) or the rectified waveform (RECT) showing either the positive or the negative cycle of the full waveform.
-
- Principales caractéristiques
-
Principales caractéristiques
Dakota MX2-DL Corrosion Thickness Gauge
Support & Resources
Transducer Options
A wide range of Corrosion Thickness Transducers available.
DakMaster™
From inspection to professional reports at the click of a button.
Features Explained
Repeatability / Stability Indicator
Consisting of 6 vertical bars, when all the bars are fully illuminated and the last digit on the digital thickness value is stable, the gauge is reliably measuring the material thickness.
High Speed Scan with Minimum Thickness Display
By significantly increasing the measurement refresh rate this mode allows the user to make scanned passes over the test material. The smallest thickness value is held in memory and displayed when scanning is complete. This feature can also be used in conjunction with the minimum & maximum limit alarm feature (model dependant).
Differential Mode
Once a user defined nominal thickness value has been set, the gauge will display the +/- thickness difference from the nominal value entered.
Limit Alarm Mode
The user can define minimum and maximum thickness limits. If the measurement falls outside the upper or lower limit a red LED will light and the beeper sounds. A green LED will light to indicate an acceptable thickness.
V-Path Correction
Dual element transducers consist of a probe with two crystals (one to transmit and one to receive the sound pulse). The crystals are separated by an acoustic barrier - generating a 'V-shaped' sound path as the sound travels from one element to the other. This path is slightly longer than the direct path therefore V-path correction is used to calculate the correct thickness.
Measurement Modes Explained
Pulse Echo (PE):
The normal display mode, measures the total thickness from the base of the transducer probe to the material density boundary (typically the back wall). Ideal for pit and flaw detection.
Echo - Echo Mode (EE):
Also known as the ThruPaint™ Mode, EE ignores the coating thickness, displaying the material thickness from the top surface of the material to the material density boundary.
Display Modes Explained
Material Thickness Digits Display:
The standard display on all models, this displays the numerical thickness value in either millimetres (MM) or inches (IN).
Scan Bar Display:
A linear graphic display which allows users to graphically monitor changes in thickness readings. As the scale range can be adjusted by the user, this display is ideal for observing tiny variations in material thicknesses.
B-Scan Display:
A time based cross sectional 2D block view of the thickness provides a graphical view of the material thickness - ideal for relative depth analysis.
A-Scan Display; Full Wave (RF):*
The A-Scan display shows the sine wave created by the reflected sound, or oscillation, from the material being measured. In RF mode the full wave form is displayed.
A-Scan Display; Rectified (+ or -):*
Users can select to view either the positive or the negative cycle of the full waveform (RF). This rectified (RECT) display shows the amplitude of the echo versus the transit time.
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Corrosion Thickness Gauge is running the latest firmware, select your gauge below.
Dakota Ultrasonic MMX-7
Dakota Ultrasonic MVX
DakotaNDT MX
-
- caractéristiques du produit
-
caractéristiques du produitDakota MX2-DL Corrosion Thickness Gauge
Model MX2-DL Mode d'Affichage Affichage valeurs épaisseur matériau Affichage coupe transversale B-Scan Affichage combiné B-Scan et valeurs Affichage barre scan Affichage A-Scan Rectifié +,Rectifié -, Forme Onde Complète (RF)Measurement Rate Manuel 8 mesures par secondeMode Scan 250 mesures par secondeAffichage barre scan 10 mesures par secondeRésolution Mesure 0,01mm (0,001”)Plage Etalonnage Vélocité 309,88 - 18.542m/s (0,0122 - 0,7300in/μs)Fonctions supplémentaires Mode Scan Grande Vitesse Mode Différentiel Mode Alarme Limite Vitesse affichage B-Scan 10 - 200 mesures par secondeRéglages d’Etalonnage 64 configurations définies par l’utilisateur transférables vers et depuis une archive PCPortes •PE : 1 porte; EE: 2 portes, 1 porte avec retenue
• Seuil ajustableType de Générateur d’Impulsion Square wave pulser with adjustable pulse width (spike, thin, wide)Gain Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)Minutage 100MHz 8 bit ultra low power digitizerCapacité mémoire et enregistrement de données • Mémoire interne 4 Go
• Enregistrement séquentiel et en grille
• Identification lot alphanumérique
• OBSTRUCT indique les emplacements indisponibles
• Capture graphique bitmap et visualisation de la captureType de Sonde bi-composantsPlage Fréquence Sonde 1 - 10MHzReconnaissance Sonde Manuel - à choisir dans une listeCorrection erreur propagation V /duale automatiqueZéro Sonde manuel (via disque sonde intégré)Affichage 1/8" VGA (échelle de gris)
zone visible 62 x 45,7mm (2,4 x 1,8 pouces)Taux de rafraîchissement de l’affichage 25HzUnités (au choix) mm ou poucesRétroéclairage LED on / off / autoIndicateur Répétabilité / Stabilité
-
- Informations techniques
-
Technical SpecificationDakota MX2-DL Corrosion Thickness Gauge
Part Number Description Certificate Z-149-0006 Dakota MX2-DL Thickness Gauge (MVX) 
Type de Sonde bi-composants Précision de Mesure 0,01mm (0,001”) Capacité mémoire Mémoire interne 4 Go Température de fonctionnement -10 à 60ºC (14 à 140ºF) Sortie données USB Type de pile 3 x piles AA et via USB Autonomie des piles Alcaline – 35 hrs, Nicad – 10 hrs et NI-MH – 35 hrs Poids de la jauge 383g (13,5oz) - avec piles Dimensions de la jauge 63,5 x 165 x 31,5mm (2,5 x 6,5 x 1,24”) Colisage Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. PC Software and Data Transfer Cable included with data logging gauges. 1Measuring range & accuracy depends on material, surface conditions and the transducer selected
2Approximate battery life, when in continuous measurement mode.
● Certificate of Calibration supplied as standard
-
- Normes
-
NormesDakota MX2-DL Corrosion Thickness Gauge
Factory calibration traceable to NIST & MIL-STD-45662
-
- Téléchargements
-
Téléchargements
-
Jauges de Corrosion Elcometer CG70 Mode d’emploi
-
Elcometer CG70 Jauges de Corrosion - Fiche technique
-
Elcometer CG70 Jauges de Corrosion - Déclaration de Conformité
- Numéro d'article
-
Numéro d'articleDakota MX2-DL Corrosion Thickness Gauge
-
Dakota MX2-DL Corrosion Thickness Gauge- Numéro d'article : Z-149-0006
Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Corrosion Thickness Gauge has large, easy to read displays and provides users with A and B-Scan options for accurate interpretation of measurements.
Versatile
Measures uncoated & coated surfaces
Flexible & easy to use, the Dakota MX2-DL Corrosion Thickness gauge doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ Mode (EE), coatings up to 2mm (80mils) are ignored.
Powerful
Store up to 4GB of readings and waveforms or B-Scans
Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB of readings together with their waveforms.
Customisable
Choose & customise the reading display
The Dakota MX2-DL ultrasonic thickness gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, B-Scan, B-Scan combined with readings, Scan bar & the A-Scan.
Sommaire
Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Thickness Gauge offers 2D cross sectional block view, providing a graphical representation of a material's thickness, ideal for accurate analysis and identification of pits and corroded areas.
MX2-DL Ultrasonic Thickness Gauge: Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB worth of data together with their waveforms. The MX2-DL Thickness Gauge also features an A-Scan display, allowing users to fully interpret and control measurement readings. The user can select to view either the full waveform (RF) or the rectified waveform (RECT) showing either the positive or the negative cycle of the full waveform.
Téléchargements-
Jauges de Corrosion Elcometer CG70 Mode d’emploi
-
Elcometer CG70 Jauges de Corrosion - Fiche technique
-
Elcometer CG70 Jauges de Corrosion - Déclaration de Conformité
Principales caractéristiques
Dakota MX2-DL Corrosion Thickness Gauge
Support & Resources
Transducer Options
A wide range of Corrosion Thickness Transducers available.
DakMaster™
From inspection to professional reports at the click of a button.
Features Explained
Repeatability / Stability Indicator
Consisting of 6 vertical bars, when all the bars are fully illuminated and the last digit on the digital thickness value is stable, the gauge is reliably measuring the material thickness.
High Speed Scan with Minimum Thickness Display
By significantly increasing the measurement refresh rate this mode allows the user to make scanned passes over the test material. The smallest thickness value is held in memory and displayed when scanning is complete. This feature can also be used in conjunction with the minimum & maximum limit alarm feature (model dependant).
Differential Mode
Once a user defined nominal thickness value has been set, the gauge will display the +/- thickness difference from the nominal value entered.
Limit Alarm Mode
The user can define minimum and maximum thickness limits. If the measurement falls outside the upper or lower limit a red LED will light and the beeper sounds. A green LED will light to indicate an acceptable thickness.
V-Path Correction
Dual element transducers consist of a probe with two crystals (one to transmit and one to receive the sound pulse). The crystals are separated by an acoustic barrier - generating a 'V-shaped' sound path as the sound travels from one element to the other. This path is slightly longer than the direct path therefore V-path correction is used to calculate the correct thickness.
Measurement Modes Explained
Pulse Echo (PE):
The normal display mode, measures the total thickness from the base of the transducer probe to the material density boundary (typically the back wall). Ideal for pit and flaw detection.
Echo - Echo Mode (EE):
Also known as the ThruPaint™ Mode, EE ignores the coating thickness, displaying the material thickness from the top surface of the material to the material density boundary.
Display Modes Explained
Material Thickness Digits Display:
The standard display on all models, this displays the numerical thickness value in either millimetres (MM) or inches (IN).
Scan Bar Display:
A linear graphic display which allows users to graphically monitor changes in thickness readings. As the scale range can be adjusted by the user, this display is ideal for observing tiny variations in material thicknesses.
B-Scan Display:
A time based cross sectional 2D block view of the thickness provides a graphical view of the material thickness - ideal for relative depth analysis.
A-Scan Display; Full Wave (RF):*
The A-Scan display shows the sine wave created by the reflected sound, or oscillation, from the material being measured. In RF mode the full wave form is displayed.
A-Scan Display; Rectified (+ or -):*
Users can select to view either the positive or the negative cycle of the full waveform (RF). This rectified (RECT) display shows the amplitude of the echo versus the transit time.
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Corrosion Thickness Gauge is running the latest firmware, select your gauge below.
Dakota Ultrasonic MMX-7
Dakota Ultrasonic MVX
DakotaNDT MX
caractéristiques du produitDakota MX2-DL Corrosion Thickness GaugeModel MX2-DL Mode d'Affichage Affichage valeurs épaisseur matériau Affichage coupe transversale B-Scan Affichage combiné B-Scan et valeurs Affichage barre scan Affichage A-Scan Rectifié +,Rectifié -, Forme Onde Complète (RF)Measurement Rate Manuel 8 mesures par secondeMode Scan 250 mesures par secondeAffichage barre scan 10 mesures par secondeRésolution Mesure 0,01mm (0,001”)Plage Etalonnage Vélocité 309,88 - 18.542m/s (0,0122 - 0,7300in/μs)Fonctions supplémentaires Mode Scan Grande Vitesse Mode Différentiel Mode Alarme Limite Vitesse affichage B-Scan 10 - 200 mesures par secondeRéglages d’Etalonnage 64 configurations définies par l’utilisateur transférables vers et depuis une archive PCPortes •PE : 1 porte; EE: 2 portes, 1 porte avec retenue
• Seuil ajustableType de Générateur d’Impulsion Square wave pulser with adjustable pulse width (spike, thin, wide)Gain Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)Minutage 100MHz 8 bit ultra low power digitizerCapacité mémoire et enregistrement de données • Mémoire interne 4 Go
• Enregistrement séquentiel et en grille
• Identification lot alphanumérique
• OBSTRUCT indique les emplacements indisponibles
• Capture graphique bitmap et visualisation de la captureType de Sonde bi-composantsPlage Fréquence Sonde 1 - 10MHzReconnaissance Sonde Manuel - à choisir dans une listeCorrection erreur propagation V /duale automatiqueZéro Sonde manuel (via disque sonde intégré)Affichage 1/8" VGA (échelle de gris)
zone visible 62 x 45,7mm (2,4 x 1,8 pouces)Taux de rafraîchissement de l’affichage 25HzUnités (au choix) mm ou poucesRétroéclairage LED on / off / autoIndicateur Répétabilité / Stabilité Technical SpecificationDakota MX2-DL Corrosion Thickness GaugePart Number Description Certificate Z-149-0006 Dakota MX2-DL Thickness Gauge (MVX) Type de Sonde bi-composants Précision de Mesure 0,01mm (0,001”) Capacité mémoire Mémoire interne 4 Go Température de fonctionnement -10 à 60ºC (14 à 140ºF) Sortie données USB Type de pile 3 x piles AA et via USB Autonomie des piles Alcaline – 35 hrs, Nicad – 10 hrs et NI-MH – 35 hrs Poids de la jauge 383g (13,5oz) - avec piles Dimensions de la jauge 63,5 x 165 x 31,5mm (2,5 x 6,5 x 1,24”) Colisage Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. PC Software and Data Transfer Cable included with data logging gauges. 1Measuring range & accuracy depends on material, surface conditions and the transducer selected
2Approximate battery life, when in continuous measurement mode.
● Certificate of Calibration supplied as standardNormesDakota MX2-DL Corrosion Thickness GaugeFactory calibration traceable to NIST & MIL-STD-45662
-
-