Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Corrosion Thickness Gauge has large, easy to read displays and provides users with A and B-Scan options for accurate interpretation of measurements.
- Resumen
-
Resumen
-
Versatile
Measures uncoated & coated surfaces
Flexible & easy to use, the Dakota MX2-DL Corrosion Thickness gauge doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ Mode (EE), coatings up to 2mm (80mils) are ignored.
Powerful
Store up to 4GB of readings and waveforms or B-Scans
Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB of readings together with their waveforms.
Customisable
Choose & customise the reading display
The Dakota MX2-DL ultrasonic thickness gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, B-Scan, B-Scan combined with readings, Scan bar & the A-Scan.
The Dakota MX2-DL Thickness Gauge offers 2D cross sectional block view, providing a graphical representation of a material's thickness, ideal for accurate analysis and identification of pits and corroded areas.
MX2-DL Ultrasonic Thickness Gauge: Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB worth of data together with their waveforms. The MX2-DL Thickness Gauge also features an A-Scan display, allowing users to fully interpret and control measurement readings. The user can select to view either the full waveform (RF) or the rectified waveform (RECT) showing either the positive or the negative cycle of the full waveform.
-
- Características más importantes
-
Características más importantes
Dakota MX2-DL Corrosion Thickness Gauge
Support & Resources
Transducer Options
A wide range of Corrosion Thickness Transducers available.
DakMaster™
From inspection to professional reports at the click of a button.
Features Explained
Repeatability / Stability Indicator
Consisting of 6 vertical bars, when all the bars are fully illuminated and the last digit on the digital thickness value is stable, the gauge is reliably measuring the material thickness.
High Speed Scan with Minimum Thickness Display
By significantly increasing the measurement refresh rate this mode allows the user to make scanned passes over the test material. The smallest thickness value is held in memory and displayed when scanning is complete. This feature can also be used in conjunction with the minimum & maximum limit alarm feature (model dependant).
Differential Mode
Once a user defined nominal thickness value has been set, the gauge will display the +/- thickness difference from the nominal value entered.
Limit Alarm Mode
The user can define minimum and maximum thickness limits. If the measurement falls outside the upper or lower limit a red LED will light and the beeper sounds. A green LED will light to indicate an acceptable thickness.
V-Path Correction
Dual element transducers consist of a probe with two crystals (one to transmit and one to receive the sound pulse). The crystals are separated by an acoustic barrier - generating a 'V-shaped' sound path as the sound travels from one element to the other. This path is slightly longer than the direct path therefore V-path correction is used to calculate the correct thickness.
Measurement Modes Explained
Pulse Echo (PE):
The normal display mode, measures the total thickness from the base of the transducer probe to the material density boundary (typically the back wall). Ideal for pit and flaw detection.
Echo - Echo Mode (EE):
Also known as the ThruPaint™ Mode, EE ignores the coating thickness, displaying the material thickness from the top surface of the material to the material density boundary.
Display Modes Explained
Material Thickness Digits Display:
The standard display on all models, this displays the numerical thickness value in either millimetres (MM) or inches (IN).
Scan Bar Display:
A linear graphic display which allows users to graphically monitor changes in thickness readings. As the scale range can be adjusted by the user, this display is ideal for observing tiny variations in material thicknesses.
B-Scan Display:
A time based cross sectional 2D block view of the thickness provides a graphical view of the material thickness - ideal for relative depth analysis.
A-Scan Display; Full Wave (RF):*
The A-Scan display shows the sine wave created by the reflected sound, or oscillation, from the material being measured. In RF mode the full wave form is displayed.
A-Scan Display; Rectified (+ or -):*
Users can select to view either the positive or the negative cycle of the full waveform (RF). This rectified (RECT) display shows the amplitude of the echo versus the transit time.
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Corrosion Thickness Gauge is running the latest firmware, select your gauge below.
Dakota Ultrasonic MMX-7
Dakota Ultrasonic MVX
DakotaNDT MX
-
- Características del medidor
-
Características del medidorDakota MX2-DL Corrosion Thickness Gauge
Model MX2-DL Modo de Pantalla Pantalla dígitos de velocidad de material Pantalla Escan B corte transversal Pantalla combinada escan B y dígitos Pantalla barra de escan Pantalla escan A + Rectificado, -Rectificado, Forma de Onda completa (RF)Measurement Rate Manual 8 lecturas por segundoModo Escan 250 lecturas por segundoPantalla barra de escan 10 lecturas por segundoResolución de Medición 0,01mm (0,001”)Rango de Velocidad de Calibración 309,88 - 18.542m/s (0.0122 - 0.7300in/μs)Características Adicionales Modo de escan alta velocidad Modo diferencial Modo alarma de limite Velocidad de pantalla escan B 10 to 200 lecturas por segundoAjustes de calibración 64 configuraciones definidas por el usuario transferibles hacia o desde un archivo de PCPortales •PE: 1 portal; EE: 2 portales, 1 portal con retenedor
• Umbral ajustableTipo pulso Square wave pulser with adjustable pulse width (spike, thin, wide)Ganancia Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)Cronometraje 100MHz 8 bit ultra low power digitizerMemoria y registro de datos • Memoria interna de 4 GB
• secuencial y registro de cuadricula
• Identificación de lote alfa numérica
• OBSTRUCCIÓN indica locaciones inaccesibles
• Captura de gráfico de mapa de bits y visor de capturaTipo de sonda de transductor Elemento dualRango de frecuencia de transductor 1 - 10MHzReconocimiento de transductor Manual - seleccionable de una listaV-path (trayectoria V)/corrección error doble trayectoria AutomáticoSonda Cero Manual (vía disco de sonda integrado)Pantalla 1/8 VGA (escala de gris) 62 x 45,7mm (2,4 x 1,8 pulgadas
62 x 45,7mm (2,4 x 1,8 pulgadas) área visibleFrecuencia de actualización de pantalla 25HzUnidades (seleccionable) mm o pulgadasLuz de Fondo LED on / off / autoRepetibilidad / Indicador de Estabilidad
-
- Información técnica
-
Technical SpecificationDakota MX2-DL Corrosion Thickness Gauge
Part Number Description Certificate Z-149-0006 Dakota MX2-DL Thickness Gauge (MVX) 
Tipo de sonda de transductor Elemento dual Precisión de Medición 0,01mm (0,001”) Memoria Memoria interna de 4 GB Temperatura de funcionamiento -10 a 60ºC (14 a 140ºF) Salida de datos USB Fuente de alimentación 3 pilas AA y a través de USB Duración de las pilas Alcalinas: 35 horas; Nicad: 10 horas; NI-MH: 35 horas Peso del medidor 383g (13,5oz) - incluidas pilas Dimensiones del medidor 63,5 x 165 x 31,5mm (2,5 x 6,5 x 1,24”) Lista de empaque Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. PC Software and Data Transfer Cable included with data logging gauges. 1Measuring range & accuracy depends on material, surface conditions and the transducer selected
2Approximate battery life, when in continuous measurement mode.
● Certificate of Calibration supplied as standard
-
- Normas
-
NormasDakota MX2-DL Corrosion Thickness Gauge
Factory calibration traceable to NIST & MIL-STD-45662
-
- Descargas
-
Descargas
-
Medidores de Corrosión CG70 Manual de instrucciones
-
Medidores de Corrosión CG70 - Hoja de datos
-
Medidores de Corrosión CG70 - Declaración de conformidad
- Referencia
-
ReferenciaDakota MX2-DL Corrosion Thickness Gauge
-
Dakota MX2-DL Corrosion Thickness Gauge- Referencia : Z-149-0006
Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Corrosion Thickness Gauge has large, easy to read displays and provides users with A and B-Scan options for accurate interpretation of measurements.
Versatile
Measures uncoated & coated surfaces
Flexible & easy to use, the Dakota MX2-DL Corrosion Thickness gauge doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ Mode (EE), coatings up to 2mm (80mils) are ignored.
Powerful
Store up to 4GB of readings and waveforms or B-Scans
Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB of readings together with their waveforms.
Customisable
Choose & customise the reading display
The Dakota MX2-DL ultrasonic thickness gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, B-Scan, B-Scan combined with readings, Scan bar & the A-Scan.
Resumen
Dakota MX2-DL Corrosion Thickness Gauge
The Dakota MX2-DL Thickness Gauge offers 2D cross sectional block view, providing a graphical representation of a material's thickness, ideal for accurate analysis and identification of pits and corroded areas.
MX2-DL Ultrasonic Thickness Gauge: Taking 250 readings per second in scan mode, the internal data logger stores up to 4GB worth of data together with their waveforms. The MX2-DL Thickness Gauge also features an A-Scan display, allowing users to fully interpret and control measurement readings. The user can select to view either the full waveform (RF) or the rectified waveform (RECT) showing either the positive or the negative cycle of the full waveform.
Descargas-
Medidores de Corrosión CG70 Manual de instrucciones
-
Medidores de Corrosión CG70 - Hoja de datos
-
Medidores de Corrosión CG70 - Declaración de conformidad
Características más importantes
Dakota MX2-DL Corrosion Thickness Gauge
Support & Resources
Transducer Options
A wide range of Corrosion Thickness Transducers available.
DakMaster™
From inspection to professional reports at the click of a button.
Features Explained
Repeatability / Stability Indicator
Consisting of 6 vertical bars, when all the bars are fully illuminated and the last digit on the digital thickness value is stable, the gauge is reliably measuring the material thickness.
High Speed Scan with Minimum Thickness Display
By significantly increasing the measurement refresh rate this mode allows the user to make scanned passes over the test material. The smallest thickness value is held in memory and displayed when scanning is complete. This feature can also be used in conjunction with the minimum & maximum limit alarm feature (model dependant).
Differential Mode
Once a user defined nominal thickness value has been set, the gauge will display the +/- thickness difference from the nominal value entered.
Limit Alarm Mode
The user can define minimum and maximum thickness limits. If the measurement falls outside the upper or lower limit a red LED will light and the beeper sounds. A green LED will light to indicate an acceptable thickness.
V-Path Correction
Dual element transducers consist of a probe with two crystals (one to transmit and one to receive the sound pulse). The crystals are separated by an acoustic barrier - generating a 'V-shaped' sound path as the sound travels from one element to the other. This path is slightly longer than the direct path therefore V-path correction is used to calculate the correct thickness.
Measurement Modes Explained
Pulse Echo (PE):
The normal display mode, measures the total thickness from the base of the transducer probe to the material density boundary (typically the back wall). Ideal for pit and flaw detection.
Echo - Echo Mode (EE):
Also known as the ThruPaint™ Mode, EE ignores the coating thickness, displaying the material thickness from the top surface of the material to the material density boundary.
Display Modes Explained
Material Thickness Digits Display:
The standard display on all models, this displays the numerical thickness value in either millimetres (MM) or inches (IN).
Scan Bar Display:
A linear graphic display which allows users to graphically monitor changes in thickness readings. As the scale range can be adjusted by the user, this display is ideal for observing tiny variations in material thicknesses.
B-Scan Display:
A time based cross sectional 2D block view of the thickness provides a graphical view of the material thickness - ideal for relative depth analysis.
A-Scan Display; Full Wave (RF):*
The A-Scan display shows the sine wave created by the reflected sound, or oscillation, from the material being measured. In RF mode the full wave form is displayed.
A-Scan Display; Rectified (+ or -):*
Users can select to view either the positive or the negative cycle of the full waveform (RF). This rectified (RECT) display shows the amplitude of the echo versus the transit time.
Firmware Upgrades
Regularly checking and updating your firmware is crucial for maintaining performance, and ensuring compatibility with new features.
Make sure your Dakota Corrosion Thickness Gauge is running the latest firmware, select your gauge below.
Dakota Ultrasonic MMX-7
Dakota Ultrasonic MVX
DakotaNDT MX
Características del medidorDakota MX2-DL Corrosion Thickness GaugeModel MX2-DL Modo de Pantalla Pantalla dígitos de velocidad de material Pantalla Escan B corte transversal Pantalla combinada escan B y dígitos Pantalla barra de escan Pantalla escan A + Rectificado, -Rectificado, Forma de Onda completa (RF)Measurement Rate Manual 8 lecturas por segundoModo Escan 250 lecturas por segundoPantalla barra de escan 10 lecturas por segundoResolución de Medición 0,01mm (0,001”)Rango de Velocidad de Calibración 309,88 - 18.542m/s (0.0122 - 0.7300in/μs)Características Adicionales Modo de escan alta velocidad Modo diferencial Modo alarma de limite Velocidad de pantalla escan B 10 to 200 lecturas por segundoAjustes de calibración 64 configuraciones definidas por el usuario transferibles hacia o desde un archivo de PCPortales •PE: 1 portal; EE: 2 portales, 1 portal con retenedor
• Umbral ajustableTipo pulso Square wave pulser with adjustable pulse width (spike, thin, wide)Ganancia Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)Cronometraje 100MHz 8 bit ultra low power digitizerMemoria y registro de datos • Memoria interna de 4 GB
• secuencial y registro de cuadricula
• Identificación de lote alfa numérica
• OBSTRUCCIÓN indica locaciones inaccesibles
• Captura de gráfico de mapa de bits y visor de capturaTipo de sonda de transductor Elemento dualRango de frecuencia de transductor 1 - 10MHzReconocimiento de transductor Manual - seleccionable de una listaV-path (trayectoria V)/corrección error doble trayectoria AutomáticoSonda Cero Manual (vía disco de sonda integrado)Pantalla 1/8 VGA (escala de gris) 62 x 45,7mm (2,4 x 1,8 pulgadas
62 x 45,7mm (2,4 x 1,8 pulgadas) área visibleFrecuencia de actualización de pantalla 25HzUnidades (seleccionable) mm o pulgadasLuz de Fondo LED on / off / autoRepetibilidad / Indicador de Estabilidad Technical SpecificationDakota MX2-DL Corrosion Thickness GaugePart Number Description Certificate Z-149-0006 Dakota MX2-DL Thickness Gauge (MVX) Tipo de sonda de transductor Elemento dual Precisión de Medición 0,01mm (0,001”) Memoria Memoria interna de 4 GB Temperatura de funcionamiento -10 a 60ºC (14 a 140ºF) Salida de datos USB Fuente de alimentación 3 pilas AA y a través de USB Duración de las pilas Alcalinas: 35 horas; Nicad: 10 horas; NI-MH: 35 horas Peso del medidor 383g (13,5oz) - incluidas pilas Dimensiones del medidor 63,5 x 165 x 31,5mm (2,5 x 6,5 x 1,24”) Lista de empaque Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. PC Software and Data Transfer Cable included with data logging gauges. 1Measuring range & accuracy depends on material, surface conditions and the transducer selected
2Approximate battery life, when in continuous measurement mode.
● Certificate of Calibration supplied as standardNormasDakota MX2-DL Corrosion Thickness GaugeFactory calibration traceable to NIST & MIL-STD-45662
-
-